Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

How to prevent Second extrudeur to hurt ?

Hello,


How to prevent the second extrudeur to hurt and unstick the printed PLA or ABS when printing litle things ?


3 people have this problem

You need to make sure they are exactly the same height (distance from the bed).

If they are not, the instructions on how to adjust them is on page 61 of the manual:

http://www.lpfrg.com/media/pdf/Leapfrog-3D-Printers-Creatr-Manual-Simplify3D-v1.0.0.pdf


Also, if you're not currently using the second extruder, you can move it a little higher so it's out of the way.

I just unscrew the nozzle if two extruders not needed this way when I put it back it is already set at the correct height.

 

I just heat other extruder so it melts a plastic particle it hits rather then to pull whole model from the bed. If someone thinks it's wrong approach please let me know.
Login or Signup to post a comment