Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic
Solved

Extrusion at lower temperature than default

Dear all,


Does anyone know how to enable printing at lower temperature (100-120°C)? Im currently testing new materials for the creatr but the software does not allow me (preventing cold extrusion).


Thanks!


 As far as I know that setting is in the firmware.

From the Configuration.h file for the Creatr Dual:


#define EXTRUDE_MINTEMP 150


If you don't have the factory firmware you can get a copy by creating a support ticket.


Bob

Open the control panel in Simplify3D and send a M302 command to the connected printer which overrides the prevention of cold extrusion. You only have to send it once until the printer is rebooted.

 

Thanks! I give it a try.


Login or Signup to post a comment