Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

CreatrHS strange behavior when starting a print

Does this behavior seem normal to anyone? When I start a print, when it draws the boundary around the print area, it seems to have a really hard time, it glitches and pauses sometimes making a lot of noise. However, when the print starts, it prints with normal movement.


Start of Print:



After Print Begins:


1 person has this problem

I sometimes get this, not quite as bad as your video though. I put it down to the way simplify3D has to increase the outer perimeter to make the skirt/brim. I assume it takes the original mesh points, moves them away, and extrapolates between them. This extrapolation doesn't create very smooth movements. I could be wrong but that's the conclusion I drew

 

the start print video isn't working. Here it is again:



1 person likes this
Login or Signup to post a comment