Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Who can print me an object of d=27cm, h=14cm for little cash?

Different as the Creatr HS, my personal 3D printers´ bed is too small to print one object, which I urgently need for my private project. Is there anyone out there, who could help me?  
The object is in principle cylindrical as shown at the attached image. I kept the slope of the walls mainly >45 degree. However, there will be a need for some PVA and it should be printed as one piece. 

It goes w/o saying that I am covering material and efforts in a "non-bureaucratic" manner (100+€?). I´d be very happy, if someone would be willed to help. Please contact me at mw @markuswolf.de. 

JPG
JPG
1 Comment

Hi Markus


I can print 300 x 260 x 200 on my dual Creatr could go to 270 on the X however I like 5mm at each end for clearance.


Somone else may have a single extruder which could do it, vacuum cleaner or bottle?


Cheers

Login or Signup to post a comment