Leapfrog Creatr HS___
I´ve got an issue with the Z axis as it makes some strange noises and it won´t go UP normaly.
Check the video here:
Has this happened to anyone? Any solutions?
Dear Marcos Ferreiro ,
I believe my colleague Aaron is helping you out with this issue on your Creatr HS.
My first impression based on the noise is that you would have to check the level of the metal support for the glass bed and see if there is a difference between the front of the support and the back. You can use the top of the printer as a reference point and measure the distance using a ruler.
Let me know how it goes.
I am glad to hear that my colleague managed to solve the issue you had.
Hello, I have the same issue, could you resend me the answer/solution ?
If the bed support is not level please see the steps in the PDF file attached in order to resolve this issue.
Hi, that is exactly what I need ( I think) :-) , thank you!
In my case, after a first impression, the printer stays stuck and the heights are the same. the distance between the noe and the bed is more than a cm and it won't react to manual control, neither park nor move...
My problem has been solved after receiving and mounting a new motherboard-the printer was still under guarantee-