Or call our technical support: +31852080825

Available Monday through Friday from 7AM to 3:30PM CET
Please create a ticket before calling and keep the ticket number at hand.
At the moment we are only offering support in English, so we kindly ask you to address your issue in English.
Start a new topic

Upgrade From Bolt To Bolt Pro

Hello, I would like to know if some of the upgrade you made on the Bolt pro could fit in a standard Bolt. I was thinking of - the granite bed (the glass one is not totally flat and my hot end scratch it from time to time) - the V2 hot end (even if i don't know the difference with mine) - the fan duct (maybe the best possible improvement ) - the ability to swap filament in production (should be only software upgrade) Thank you for your reply. Nicolas
1 Comment

Sadly sir even though they may look like subtle design changes they are quite different from the original design so just swapping the parts is not really a option.

As for the fan ducts even the original design has a new fan duct model and swapping the filament during printing was always possible by using the pause option as the hot end remains at temperature and you can remove and load new filament.

Login or Signup to post a comment