Hello and thank you for choosing the Leapfrog Xeed for your printing needs.


The following solution will instruct you on how to remove filament residue from the print head drive units on your Leapfrog Xeed 2015 3D printer


- a number 2 , 2.5 and 3 Allen key;

To remove the filament from the print head you need to do the following:

1.First remove the 2 screws that hold the print head housing in place(Pic.1) using the 2.5 Allen key:


2.Now lift the housing to expose the drive units and the filament guiding tubes(Pic.2):


3.Now unbolt the side screw of the motor where the filament is stuck left or right (Pic.3a and b) using the number 3 Allen key:



4.Now you can lift the motor (Pic.4):


5.And the last step is to remove the filament guiding tube for which you need to remove the circled grub screw (Pic.5) using the number 2 Allen key:


This should help your drive units feed the filament better, improving the quality of your prints.

We thank you for checking out our Leapfrog 3D Printer technical support solutions online! If you were unable to fine a solution in our database, please feel free to open a new support ticket by clicking the following link: I want to open a new support ticket.