Hello and thank you for choosing the Leapfrog Xeed for your printing needs.
The following solution contains two ABS test for the Xeed printer;
1. The first gcode is for a small denture model. We used a layer height of 200 microns at a speed of 80 mm/s; For more information on the settings please see the attached factory file;
2. The second gcode uses the same type of settings and layer height but it has different shapes;
The purpose of the solution is to provide a example of a gcode which can be used to test your printer;
Please NOTE that in order to print these models the surface of the bed was covered with Leapfrog 3D spray which prevented the models from warping;
We thank you for checking out our Leapfrog 3D Printer technical support solutions online! If you were unable to fine a solution in our database, please feel free to open a new support ticket by clicking the following link: I want to open a new support ticket.