Please find below the parameters and scripts used for Leapfrog Creatr dual and Simplify3D.


Starting Script

G28 F1200 ; home all axes

T0 ; switch to right extruder

G1 Z0.2 ; raise nozzle

G92 E0 ; zero extruder

G1 E3 F225 ; purge nozzle

T1 ; switch to left extruder

G92 E0 ; zero extruder

G1 E3 F225 ; purge nozzle

G1 Y15 Z0.05 F1200 ; slow wipe

G1 Y20 Z0.25 ; lift

G92 E0 ; zero extruder again


Ending Script
M104 S0 T0 ; turn off right extruder
M104 S0 T1 ; turn off left extruder
M140 S0 T0 ; turn off bed
G1 Z200 F1200 ; drop bed
G28 X0 ; home X axis
M84 ; disable motors


Extruder

Extruder tool index (Left): 1
Extruder tool index (Right): 0

Nozzle Diameter: 0,35mm

Extrusion multiplier: 1,00

Extrusion width: 0,4mm

Retraction Distance: 1mm

Retraction Speed: 1800mm/min


G-code

Machine type: Cartesian Robot (rectangular volume)

Build volume (XYZ) 270, 280, 180

Origin offset (XYZ) 0, 0, 0

Homing dir (XYZ) Min, Min, Min

Flip Build Table axis: Y
Firmware type: Marlin


Speeds

Default: 3600 mm/min

Outline underspeed: 50%

Solid infill Underspeed: 80%

Support Structure underspeed: 80%
X/Y Axis Movement Speed: 4800 mm/min

Z Axis Movement Speed: 1000mm/min


Tool Change Retraction

Tool Change Retraction Distance: 12mm

Tool Change Extra Restart Distance: -0,5mm

Tool Change Retraction Speed: 600mm/min