Parts:

3DP Gland Lower.STL

3DP Gland Upper.STL


Compatible with: 

Leapfrog Bolt 

Leapfrog Bolt PRO


Description

These printhead glands are used to guide the filament through the printhead. We recommend using a material that has low friction and does not adhere with most materials like Nylon. This may be different for your application. 


Instructions: 

For installation instructions please see the following solution article


3DP Gland Lower.STL

3DP Gland Upper.STL
The 2-4mm PTFE tubing should be pushed in place. Glue may be used if the fit is not tight enough. The push-in coupling (orange) can be screwed in place.