Frequently Asked Questions

Knowledge & solution articles focusing on the Leapfrog Xeed 3D Printer

Frequently Asked Questions on LilyPrint the Xeed Operating Software & Software Update Changelog
Leapfrog Support Team Document - http://support.lpfrg.com | Applies To Leapfrog Xeed Series | This solution provides common frequently asked questions ...
Thu, 18 Feb, 2016 at 1:36 PM
How to Remove Filament Residue from the Print Head Drive Units on Your Leapfrog Xeed 2015 3D Printer
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to remove filament resid...
Thu, 18 Feb, 2016 at 3:10 PM
How to Check the Function of the Xeed Drive Unit to Make Sure It is Not an Electronic Issue
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to check the function of...
Mon, 9 May, 2016 at 1:49 PM
How to Address the Max/Min Temperature Trigger Error on the Leapfrog Xeed 2015
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to address the M999 erro...
Thu, 18 Feb, 2016 at 1:37 PM
What to do When Filament is Curling in the Print Head and you are Unable to Print
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on what to check when you notic...
Tue, 8 Mar, 2016 at 7:48 AM
How to Unclog the Hot Ends on Your Leapfrog Xeed 2015 3D Printer
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. The following solution will instruct you on how to unclog the hot ends o...
Thu, 18 Feb, 2016 at 1:41 PM
How to Add Filament Temperature Presets On Your Xeed 2015
The Xeed 2015 comes with two preheat temperature preset options programmed in the Temperature Tab: ABS and PLA This solution shows you how you can...
Tue, 22 Sep, 2015 at 1:00 PM
How to Align the Hot Ends on Your Leapfrog Xeed 2015 3D Printer
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to align the hot ends on...
Thu, 18 Feb, 2016 at 1:49 PM
What to do When the Print Head is Hitting the Side of the Printer When Using the Level Bed Command
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to solve the issue regar...
Thu, 18 Feb, 2016 at 2:02 PM
One of my Z motors is not working what do I do?
Hello and thank you for choosing the Leapfrog Xeed for your printing needs. If one of your Z stepper motors has stopped working this i quite a seriou...
Wed, 6 Apr, 2016 at 10:01 AM