Repair Instructions

Lilyprint solutions & Firmware solutions

Firmware Update (Motor Control Board) Xeed
This solution link will help you flash the most recent version of firmware for your Xeed  2015 3D printer. (This does not work for the older model Xeed) ...
Wed, 11 Mar, 2020 at 8:46 AM
Software Update (User Interface) Xeed
Before beginning: Please unscrew the 6 screws on top of the printer to have access to the internal PC of the printer. Please make sure that you ver...
Wed, 11 Mar, 2020 at 8:57 AM
Replacement: Timing Belts
Hello and thank you for choosing the Xeed for your printing needs. The following solution will instruct you on how to align or replace your Xeed y-axis ...
Tue, 10 Mar, 2020 at 10:21 AM
Replacement: Printhead Fans
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to replace the print head fa...
Tue, 10 Mar, 2020 at 10:24 AM
"Low Disk Space" Error
Leapfrog Support Team Document - http://support.lpfrg.com | Applies To Leapfrog Xeed Series | This solution resolves the "Low disk space error"...
Tue, 10 Mar, 2020 at 10:50 AM
"Black Screen/White Cursor" Error
Leapfrog Support Team Document - http://support.lpfrg.com | Applies To Leapfrog Xeed Series | This solution provides resolution to the "black screen...
Tue, 10 Mar, 2020 at 10:50 AM
"503 Service Unavailable" Error
503 Service Unavailable Error LilyPrint 1.2 needs extra software package to be installed. When updating without the package the software will not start ...
Tue, 10 Mar, 2020 at 10:50 AM
Removing the printhead extrusion motor
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to replace the print head fa...
Tue, 10 Mar, 2020 at 10:32 AM
Adjustment: touchscreen calibration
It could be that you may at some point wish to recalibrate the touchscreen as you maybe when selecting the different options in the software menu you will...
Tue, 10 Mar, 2020 at 11:05 AM
Troubleshooting Max/Min Temperature error
Hello and thank you for choosing the Leapfrog Xeed for your printing needs.   The following solution will instruct you on how to address the M999 erro...
Tue, 10 Mar, 2020 at 10:58 AM