Frequently asked questions

Min Temperature triggered on the Bolt? Why does this happen and how do I troubleshoot it?
NOTE: This article assumes that no other outside circumstances are causing the print head to stop mid-print. If this issue occurred overnight, for example, ...
Wed, 7 Jun, 2017 at 7:26 AM
Bolt (PRO), Unclog Nozzle V1.1
*On the bottom this manual is available as .Pdf Description This manual explains how to unclog a blocked Nozzle. When the Nozzle is clogged little to n...
Wed, 8 Aug, 2018 at 9:45 AM
Bolt (pro) calibration
This instruction document will describe how both hot-ends of the Leapfrog Bolt can be calibrated. In this process the bed will also be calibrated. This is t...
Fri, 18 May, 2018 at 10:16 AM