Hello and thank you for choosing Leapfrog 3D printers for your printing needs;
Please note the following solution also applies to the Creatr HS, Creatr HS Lite/XL, Creatr Single/Dual, Creatr XL and the Xeed.
Keep in mind the following temperature settings when printing with ABS/PLA :
| Material | Bed Temperature | Nozzle Temperature |
| PLA | 40-45 C° Turn off bed after layer 5 | 210-220 C° |
| ABS | 75-80 C° Keep bed on complete print | 230-250 C° |
A very important issue to remember is that if you overheat (or under-heat) the extruders and heated bed, you may experience problems with the quality your print model and could clog your extruder tubes and/or nozzles.
Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team.
We wish you happy printing!