Repair Instructions
Software solutions focusing on the Leapfrog Creatr HS 3D Printer and Simplify3D
This article is for those who may be experiencing a random freezing of the print head in the middle of a print, OR for those that only have the ability to H...
Mon, 21 Mar, 2022 at 9:25 AM
In this solution you will be instructed on how to change your Creatr HS/ HS XL/ HS Lite printhead fans.
Tools:
To change the fans yo...
Tue, 10 Mar, 2020 at 11:39 AM
Applies to Creatr HS Printers needing to print Flexible Filaments
If you have recently purchased a flexible filament gland to use w...
Mon, 4 Apr, 2016 at 1:08 PM
Estimated Time for First-Time Users (without other solution links): 20-30 minutes
Tools needed: 10mm wrench key, size 2 Allan Key
!!WARNING! NOT FO...
Mon, 15 Feb, 2016 at 11:42 AM
Hello and thank you for choosing the Creatr HS for your printing needs.
In the following solution you will be instructed on how to connect you Creat...
Thu, 7 Apr, 2016 at 9:14 AM
Hello and thank you for choosing the Creatr HS for your printing needs.
In the following solution you will be instructed on how to replace your Crea...
Mon, 4 Apr, 2016 at 1:09 PM
Hello and thank you for choosing the Creatr HS for your printing needs.
If the region you are situated in requires you to move the power output of y...
Thu, 7 Apr, 2016 at 9:19 AM
The following solution will instruct you on how to properly clean and prepare your Creatr HS Y bearings.
Tools:
a number 2 , 4 and 5...
Wed, 9 Mar, 2016 at 9:13 AM
Hello and thank you for choosing the CreatrHS for your printing needs.
The following solution will instruct you on how to replace the electronics as...
Thu, 10 Dec, 2015 at 1:51 PM
Hello and thank you for choosing the Creatr HS for your printing needs.
If one of your Y stepper motor is not working we would ask you to check t...
Thu, 7 Apr, 2016 at 9:22 AM