Version / date: 4.9.1 - 2021-06-24

This solution article will explain you how to set the most common parameters for the Leapfrog Bolt (PRO).

In case your machine is configured as standard with 0.4mm hot-ends, you can simply add the " Leapfrog / Leapfrog Bolt PRO".

When your machine is equipped with different hardware, such as different nozzle sizes, you can follow the steps below:


Step 1. 

Choose "Add printer" 

settings / printer / Add printer


Step 2. 

Select the "Add a non-networked printer" and choose Custom / Custom FFF printer


Step 3. Machine settings - Printer



Step 4. Machine settings - Extruder 1 (Right extruder)



Step 5. Machine settings - Extruder 2 (Left extruder)