Software Solutions

Reflash the Bolt and Bolt Pro software directly to SD-card
Please download 20181012_BoltPro_v1.3.1.zip and follow follow the SD card Flash instructions to reinstall the Bolt software directly to the SD-card. Ple...
Thu, 25 Oct, 2018 at 9:51 AM
How to set up a static IP address on the Leapfrog Bolt?
                    Hello and thank you for choosing the Leapfrog BOLT for your printing needs. Setting the static IP can be done as follows: Click th...
Thu, 29 Jun, 2017 at 7:35 AM
Bolt (Pro) firmware flash
!!Warning uploading the wrong firmware will damage the machine. Please pay close attention that you select the Bolt_firmware for the Bolt and The correct Bo...
Fri, 10 Aug, 2018 at 3:52 PM
Retrieve the Debug logfiles
This solution will describe how to retrieve the logfiles from the Bolt and Bolt Pro. Please read trough all the steppes before you start. Methode 1: Re...
Wed, 4 Jul, 2018 at 12:22 PM
Bolt (Pro) Factory reset
You can perform a factory reset in 3 steps. On the front of the machine is the on/off button. Hold the on/off button until the machine ask if you want...
Thu, 2 Nov, 2017 at 9:09 AM
Bolt pro Update error
Step 1 – Connect the keyboard Make sure the machine is on and connect a USB keyboard in the front USB hub of the Bolt Pro Press the Ctrl+Alt+F1 keys all a...
Thu, 25 Oct, 2018 at 9:54 AM
Bolt Pro screen rotated
Please make sure you are running at least software version 1.3.0 Step 1 – Connect the keyboard to the Bolt and enter Linux Turn on the Bolt and wait f...
Fri, 5 Oct, 2018 at 4:05 PM