Hello and thank you for choosing the Creatr HS for your printing needs.

If the region you are situated in requires you to move the power output of your Creatr HS from 230V to 115V or vice versa please follow the instructions bellow:

Safety: Please make sure to TURN OFF the printer before trying to modify anything regarding the power source!


  • a number 2 Allen key;
  • a flat head screwdriver.

    The first step is to turn of the printer and remove the power cord.

After taking these safety precautions you can use the number 2 Allen key to remove the right side panel.

Once the right side panel is removed you will have access to the power source (see the picture below). To modify the power output of you you have to turn the knob inside the power source by using the flat head screwdriver until you see a 0 this means you have 230V or until you see a 5 this meaning you have 115V.

    Once you have selected the value you wanted make sure to double check, and then you can mount the right side panel back on, plug in the power cord and start the printer.

Thank you for reading the solution and for any other issues please do not hesitate to contact our Leapfrog Support Team.


We wish you happy printing!