Part: 3D-P-180424-P1 Bolt - R2.STL
Compatible with:
Leapfrog Bolt
Leapfrog Bolt PRO
Description:
These fan ducts can be mounted below the radial fan on the printhead. Please note that there is a left and right version. The fan duct should be locked in place by locking it between radial fan and the axial fan cover on which the radial fan is mounted. (see image below)
Instructions:
We recommend printing these fan ducts in a material that can withstand temperatures higher then 100℃. ABS for example.
If you are interested in receiving a .gcode from the Leapfrog Support Team then please get in touch with us by creating a ticket on our support page.
