Hello and thank you for choosing the Leapfrog Xeed for your printing needs.


This solution article will explain how to make the internal PC boot up, when your 3D printer is powered. Please follow the next steps:


Shuttle PC
Instructions on fixing boot-up:
1. Make sure internal PC is switched off
2. Plug in a USB keyboard
3. Press the on button on PC and Immediately press F7  (a blue window should appear " Please select boot device")
4. Choose enter setup  (you will now be in BIOS menu, tab "Main")
5. Go to tab "advanced" using the keyboard arrows
6. Enter Power management Configuration
7. Use arrows to navigate to " Power-On after Power-fail" and press enter
8. Choose "Power On" and press enter
9. Press F4 to save and exit, choose yes to save. 
10. The machine will now boot up normally, and should now always boot up when powered.