Software

Simplify3D - Adjusting the Print Settings for the Creatr HS (XL)
Hello and thank you for choosing the Creatr HS for your printing needs.   The following solution will instruct you on how to adjust the print settings for...
Tue, 20 Sep, 2022 at 6:39 PM
Materialise - Exporting Build Processor Profiles (.BPPROF) - "Print Profiles"
Note: This is for the current Windows version of Materialise; the Mac version will look differently. If you ever need to export print profiles in Ma...
Fri, 20 May, 2016 at 1:55 PM
Materialise - How to Update the Latest Print Profiles in Creatr 1.0 Software
Note: This is for the current Windows version of Materialise; the Mac version will look differently. STEP 00: This only works on a computer that has an ac...
Tue, 20 Sep, 2022 at 6:28 PM
Simplify3D - How to Create a Dual Extrusion .GCODE File in Simplify 3D
In order to create a dual extrusion .GCODE file in Simplify 3D you will have to follow the steps presented below for more information please visit www.simpl...
Tue, 20 Sep, 2022 at 6:39 PM
Materialise - How to Manually Import .BPPROF Print Profiles in Creatr 1.0
Note: This is for the current Windows version of Materialise; the Mac version will look differently. If for whatever reason you were unable to update the...
Tue, 20 Sep, 2022 at 6:28 PM
Simplify3D - Printing Multiple Parts Continuous vs. Sequential
When you are printing multiple part in Simplify3D, you may wonder how to avoid printing that nasty spider web-like leakage between parts (as seen in the ...
Tue, 20 Sep, 2022 at 6:40 PM
Materialise - How to Install the Creatr 1.0 Materialise Software
       Thank you for choosing the Creatr HS and Materialise software for your printing needs. In the following solution, you will be instructed on how t...
Tue, 20 Sep, 2022 at 6:29 PM
Simplify3D - How to Print PVA on the Creatr HS/XL Using
Thank you for choosing the Creatr HS/XL and Simplify3D software for your printing needs.   The instructions below will explain how to properly u...
Tue, 20 Sep, 2022 at 6:40 PM
Simplify3D - How to Import Downloaded Print Profiles
Applies to Simplify 3D Software This solution instructs you how to import recently downloaded .FFF files (also know as Print Profiles) to Simplify 3D Ple...
Tue, 20 Sep, 2022 at 6:41 PM
Materialise - Loading and Printing External .GCODE Files in Materialise
NOTE 1: This is a temporary issue that will be fixed in one of the the next versions of Materialise. We understand that this is a tedious process for someth...
Tue, 20 Sep, 2022 at 6:30 PM