Firmware archive Creatr (XL)
In case you are looking for an earlier firmware version for your Leapfrog Creatr HS, then please find the files attached to this solution article.
Wed, 11 Mar, 2020 at 8:49 AM
Firmware: how to upload to Creatr (XL)?
Download the Correct Firmware Please see solution article for getting the correct firmware: Which Firmware Version do I Need for My Creatr Printer?...
Wed, 11 Mar, 2020 at 8:49 AM
Installing the Creatr Drivers
How to install the drivers for Creatr   In order for the printer to be able to connect to the computer, you need to install the drivers as well after havi...
Thu, 3 Jun, 2021 at 8:56 AM
Which firmware version does your motorcontrolboard currently have?
When you are interested in finding out, which firmware version is running on your machine prior to updating, you can use the 'M115' command. Please ...
Tue, 22 Jun, 2021 at 9:06 AM
Firmware: which version do I need for my Creatr (XL)?
Find out which firmware your machine needs by following these steps: 1) Does your Creatr have a black drag chain that guides the wires from the printing...
Wed, 11 Mar, 2020 at 8:50 AM
Firmware: which motorcontrolboard does my Creatr (XL) have?
Every Leapfrog Creatr is equipped with a motorcontrolboard. In total there is two different types and the Leapfrog Creatr can only be equipped with one of t...
Wed, 11 Mar, 2020 at 8:55 AM
Firmware: Create custom .Hex file
This solution article explains how to make a custom .Hex (firmware) file. Step 1. Download and install Arduino V1.0.6 (do not use a different version) f...
Wed, 4 Jan, 2023 at 1:05 PM